Stand Up Paddle Boards – An Overview Of SUP Board Shapes – There are numerous varieties of stand up paddle board shapes on the market today. We will explore the key SUP board shapes and speak about their purpose and performance.
Have you been searching for a Fully Stand Up Paddle board? Perhaps you have finally chose to provide the new sport a try but nonetheless have a few questions about the many different board options? Maybe you have graduating from Paddle Board and trying to find a second purpose specific board? Let’s explore the various shape available options today on the SUP market.
Listed here are the fundamental varieties of stand up paddling that have become popular:
* Recreational flat-water Paddling
* Paddle Surfing
* Flat Water Racing
* Downwind Paddling
* Touring Paddle Boards
* River/Rapid Paddling
Throughout SUP shapes – Many operate paddle boards that cater to the 1st time or casual paddler will fall under the “All-around” category. All-around shapes can be used for all the above mentioned types of paddling to greater or lesser extents although they are most suitable for Recreational flat-water paddling. An All Around SUP board will most likely be around 30″ wide or even wider. Typical lengths to get a beginner are 11′ -12′. Lighter riders may be able to begin with a 10′ – 10’6″ board. All-around boards usually include a fairly wide nose and tail in addition to considerable overall thickness within the 4 1/2″ to 5″ range. The wide nose, wide tail and considerable length, width and thickness alllow for an extremely stable and forgiving board. Stable and forgiving are excellent characteristics to possess in Inflatable Gym Mat while learning the basics of balance, paddling, wave negotiation, wave riding along with building your general strength and conditioning. Many All Around shapes will also include a single center fin configuration.
While some may feel the need to jump directly into a performance shape there is lots of wisdom in beginning upon an all around shape and graduating after some time to a more performance tailored shape. Plus once you have graduated you will find a second board to loan in your girlfriend/boyfriend, wife/husband or friends. If you choose wisely you can find a board that will allow you to progress from flat-water basics and will also permit you to paddle surf in waves, try out the flat water racing scene, enjoy an SUP tour and navigate rivers and small rapids. The following is a good example of what may be the first “All Around” production board originally aptly named the Jimmy Lewis – Throughout though it is currently referred to as “Cruise Control”. Other “Throughout” boards available range from the Hovie – Grand Sport, Hovie – LCSUP, Coreban – Cruiser, King’s – King Model, Siren Sojourn, SUPatx and SurfCore.
Paddle Surfing Shapes – Stand Up Paddle Surfing has progressed in leaps and bounds as board shapes and riders have pushed the limits of performance. There are multiple varieties of SUP surfing that relate with preference and wave size. Some would rather “rip” and “shred” on the smaller board keeping their feet in relatively the same position on the board, others choose to “walk” the board from nose to tail in a more traditional although no less skilled manner. Each one of these varied styles are typically but not exclusively performed on different board shapes.
In terms of learning to paddle surf an “All Around” shape is generally a great shape to start on specifically in smaller surf. The extra stability will assist you to paddle into the wave with assurance and also the length can help your glide when your gain speed to get in the wave. Once on the wave an All Around shape can be really stable underneath the feet.
While bigger is normally considered better for very first time paddlers you might like to think about a smaller board for surfing. You will most likely want a board that is as small as possible yet still be stable enough for you to balance on. Should you be headed for that surf you might like to borrow a rather smaller board coming from a friend if at all possible and try it out.
Nose Riders: Much like an throughout shape a nose rider shape meant for paddle surfing could have a relatively wide nose for hanging “five” or “ten” of the toes off of the edge. The tail can be a variety of shapes which could include, square, squash, round, or pin tail. A SUP nose riding board specific for surfing could have much narrower tapered rails and it’s nose thickness will be less. The tail will often be thinner as well to give it time to be buried in to the waves during turns. Other maneuvers might include “backward takeoffs” that are done by paddling the board backwards into the wave and spinning the board around 180 degrees once you catch the wave and “helicopters” with are essentially a 360 degree turn initiated while nose riding. Examples of great Nose riding SUP shapes are the Jimmy Lewis – Striker, Coreban – Icon, King’s – Knight Model and Siren – Sojourn.
Rippers: SUP boards sometimes called “rippers” are essentially blown up short board shapes that permit the paddle surfer to change faster, drop-in on steeper waves and negotiate barrels with greater ease. Typical “Ripper” shapes possess a pointy nose and pulled-in tail and have a 3 fin “thruster” or 4 fin “Quad” setup. Sizes are usually in the sub 7 foot to 10 foot range. A typical dimension is 9′ to 9’6″. Some good samples of “Ripper SUP” shapes would be the Coreban – Performer, Coreban – Nitro, Jimmy Lewis – Mano and Kings – WCT Model.
Big Wave Boards: Big wave boards need in order to be paddled quickly enough to catch a fast moving wave. Once approximately speed a huge wave board needs to be able to create the drop and turn at high speeds and keep it’s rails in touch with the wave. Typical big wave boards are usually in the 11′ to 13′ range and be thinner in width when compared to a normal board with very pulled in point nose along with a pin tail. Typical fin configuration will be the 3 fin “thruster”. An illustration of this a large wave gun SUP is definitely the Jimmy Lewis – Bombora.
Flat Water Racing Boards: Racing boards are created to permit the paddler to move with the water extremely fast, with all the least level of resistance. Typical widths of a racing board will be from 27″ to 30″ wide with thickness within the 4.5″ to 5.5″ range. Although race boards can be found in many lengths there are a few standard lengths that conform to official race event classes. These classes include: Stock 12’6 and under, 14′ and under and “Unlimited that could include boards 14’1″ as well as over. Race boards usually will possess a narrow nose and tail. Many boards may also feature a displacement hull which can be basically an in-depth vee nose running in to a rounded bottom. Displacement hulls generally excel in rougher ocean conditions. The displacement hull design is comparable to many boat hull designs. Other variations of race boards may have a small vee in the nose but will include a flatter bottom that carries out to more square rails. The flatter bottom designs are more favorable for very flat and calm water race conditions. Some boards specifically in the 14′ 1” and also over lengths will come with a rudder that can be controlled or “trimmed” by your foot while paddling. Race regulations only allow rudders on the 14′ 1″ and over “Unlimited” Class. This is very helpful when facing cross winds that normally could only be counterbalance by paddling on one side. Trimming along with your rudder will help you to paddle even strokes on each side preventing fatigue on a trip within your desired direction. Samples of zzunia boards are the Jimmy Lewis – Slice, Coreban – Alpha Race 12’6″, Coreban – Alpha Race 14′, Nah Skwell – Race and Hovie – Comet.
Downwind Paddling: Downwind Paddling consists of paddling with the wind typically from point A to B. Within the ocean it is actually possible to catch open ocean swells that enable the paddler to ride the wave for short distances. After a wave is caught the paddler can rest for a few seconds and adjust their directional course before paddling again into another wave or “runner”. In this particular fashion the paddler can travel great distances at impressive average speeds. Downwind boards are generally in the 12’6″ to 18″ range. They feature narrow widths inside the 27″ to 30″ range, have pointed nose profiles, and pulled in tails. Downwind boards typically have a good level of nose rocker that allow them to drop to the trough of waves without the nose “pearling” or going underwater. The base of the boards are generally flat with fairly sharp rear rails allowing them to ride the waves and alter direction easily if necessary. Types of this sort of Inflatable Floating Platform range from the Coreban – Alpha Race 12’6″ and Jimmy Lewis – Albatross.